November 2004 Archives by author
Starting: Mon Nov 1 01:31:06 CST 2004
Ending: Tue Nov 30 05:55:30 CST 2004
Messages: 211
- [JN] Tubecad
Bjørn Kolbrek
- [JN] WE-242C data, anyone?
A.Lal
- [JN] cold soldering iron?
David Barnett
- [JN] Dan Synder. New England Analog (Krell Designer?)
David Barnett
- [JN] digital/software based analyzers ?
Ralph Barone
- [JN] TJ Mesh Plates or S shaped 45's?
Geoffrey Barre
- [JN] test
Spence Barton
- [JN] test
Spence Barton
- [JN] test
Spence Barton
- [JN] Hong Kong Road Trip
Bob
- [JN] Hong Kong Road Trip
Bob
- [JN] (OT) The Win/Lin/Mac/Unix thing . . . again
BobSherman
- [JN] Re: Hello -- (spam, virus) admin question
Tony Bombera
- [JN] Pioneer Hi-Bit
Tony Bombera
- [JN] little variacs
Tony Bombera
- [JN] TJ Mesh Plates or S shaped 45's?
Tony Bombera
- [JN] Junkbox request
Peter Boser
- [JN] Tango NC-10 Specs?
Andrew Brandon
- [JN] Tango NC-10 Specs?
Andrew Brandon
- [JN] cold soldering iron?
Andrew Brandon
- [JN] Re: Hello -- (spam, virus) admin question
John Brooks
- [JN] Spam, Virus wrapup
John Brooks
- [JN] (OT) The Win/Lin/Mac/Unix thing . . . again
Paul Butterfield
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
Paul Butterfield
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
Paul Butterfield
- [JN] Any opinions on James Transformers?
Alan Cameron
- [JN] Oil Caps
Robert Chambers
- [JN] Tango NC-10 Specs?
Robert Chambers
- [JN] Tango NC-10 Specs?
Robert Chambers
- [JN] Tango NC-10 Specs?
Robert Chambers
- [JN] FYI: FA & FS: Exemplary Compression Drivers
Robert Chambers
- [JN] James Transformers
Robert Chambers
- [JN] Pioneer Hi-Bit
Timo Christ
- [JN] Pioneer Hi-Bit
Timo Christ
- [JN] Pioneer Hi-Bit
Timo Christ
- [JN] Pioneer Hi-Bit
Timo Christ
- [JN] It it possible to use tube rectifation for low voltage?
Timo Christ
- [JN] everybody got somethin' to hide ...
Brian Clark
- [JN] It it possible to use tube rectifation for low voltage?
David Crittle
- [JN] Re: Hello
Custserv
- [JN] Re: Thanks :)
Custserv
- [JN] Re: Thank you!
Custserv
- [JN] Re:
Custserv
- [JN] Re: Msg reply
Custserv
- [JN] New changes
Custserv
- [JN] digital/software based analysers ?
B D
- Sv: Sv: [JN] digital/software based analyzers ?
B D
- [JN] Test
John Dahlman
- [JN] Wanted: suggestions on tuning frequency response
David Dlugos
- [JN] FuzzMeasure 1.0
David Dlugos
- [JN] Re: [DIY] FuzzMeasure 1.0
David Dlugos
- [JN] Tango NC-10 Specs?
DrRick
- [JN] Any opinions on James Transformers?
DrRick
- [JN] TJ 45 tubes
GLenz10183 at aol.com
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
Sam Gates
- [JN] cold soldering iron?
Sam Gates
- [JN] Interesting article
Earl Geddes
- [JN] Re: Woofer boom problem
Guido
- [JN] Someone traveling to ETF2004 on Friday from Holland ?
Guido
- Sv: Sv: Sv: [JN] digital/software based analyzers ?
Guido
- Guido, Kurt [JN] digital/software based analyzers ?
Guido
- Guido, Kurt [JN] digital/software based analyzers ?
Guido
- Guido, Kurt [JN] digital/software based analyzers ?
Guido
- Sv: [JN] Any opinions on James Transformers?
Per Hasling
- Sv: [JN] Any opinions on James Transformers?
Per Hasling
- Sv: [JN] Any opinions on James Transformers?
Per Hasling
- Sv: [JN] digital/software based analyzers ?
Per Hasling
- Sv: Sv: [JN] digital/software based analyzers ?
Per Hasling
- Sv: Sv: Sv: [JN] digital/software based analyzers ?
Per Hasling
- Sv: Sv: Sv: Sv: [JN] digital/software based analyzers ?
Per Hasling
- Sv: Sv: Sv: Sv: [JN] digital/software based analyzers ?
Per Hasling
- Sv: Sv: Sv: Sv: [JN] digital/software based analyzers ?
Per Hasling
- Guido, Kurt [JN] digital/software based analyzers ?
Per Hasling
- [JN] Kurt, constant directivity ribbon horn loaded tweeter
Per Hasling
- [JN] Sv: Kurt, constant directivity ribbon horn loaded tweeter
Per Hasling
- Sv: [JN] Price for SpectraPRO ??
Per Hasling
- Sv: [JN] Kurt, constant directivity ribbon horn loaded tweeter
Per Hasling
- Michael Joncic [JN] Price for SpectraPRO ?
Per Hasling
- [JN] Sv: Guido , 300B bias
Per Hasling
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
David Home
- [JN] Re: Hello -- (spam, virus) admin question
Anya and Fred Humphrey
- [JN] any DHT tube suitable for driver on 300B DRD amp?
Jeffrey W. Jackson
- [JN] TJ Mesh Plates or S shaped 45's?
Jeffrey W. Jackson
- [JN] TJ Mesh Plates or S shaped 45's?
Jeffrey W. Jackson
- [JN] Anybody selling a turntable
Gary Johnston
- [JN] Anybody selling a turntable
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] TJ Mesh Plates or S shaped 45's?
Gary Johnston
- [JN] Price for SpectraPRO ??
Michael Joncic
- [JN] Price for SpectraPRO ?
Michael Joncic
- [JN] Re: Hello -- (spam, virus) admin question
Gary E Kaufman
- [JN] little variacs
Gary E Kaufman
- [JN] Re: Dead cats.
Eric Kingsbury
- [JN] Tubecad
Bjørn Kolbrek
- [JN] Any opinions on James Transformers?
Raymond Koonce
- [JN] TJ Mesh Plates or S shaped 45's?
Raymond Koonce
- [JN] Gotham City Audio Society Annual Flea Market
A. Lal
- [JN] Interesting article
A. Lal
- [JN] Re: [DIY] FuzzMeasure 1.0
A. Lal
- [JN] Re: [DIY] FuzzMeasure 1.0
A. Lal
- [JN] Dan Synder. New England Analog (Krell Designer?)
A. Lal
- [JN] Correction: William, not Dan Synder. New England Analog (Krell Designer?)
A. Lal
- [JN] Dan Synder. New England Analog (Krell Designer?)
A. Lal
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
Thom Mackris
- [JN] Re: Hello -- (spam, virus) admin question
Metzger, Michael A
- [JN] Any opinions on James Transformers?
Peter Millett
- [JN] Attenuator
Richard C Nevill
- [JN] OT FYI Google releases new research tool
Richard C Nevill
- [JN] Re: Hello -- (spam, virus) admin question
Bill P at PEARL
- [JN] Re: Hello -- (spam, virus) admin question
Bill P at PEARL
- [JN] Re: Hello -- (spam, virus) admin question
Bill P at PEARL
- [JN] (OT) The Win/Lin/Mac/Unix thing . . . again
Bill P at PEARL
- [JN] (OT)An OpAmp Question
Bill P at PEARL
- [JN] (OT)An OpAmp Question
Bill P at PEARL
- [JN] (OT) Are there any Excel wizards out there . . .
Bill P at PEARL
- [JN] Philips DIY CD-Pro-2M Professional CD Player
Bill P at PEARL
- [JN] little variacs
Bill P at PEARL
- [JN] digital/software based analyzers ?
Bill P at PEARL
- [JN] FS: 5pcs - Rubycon PhotoFalsh Caps 600uF @ 360WVDC
Bill P at PEARL
- [JN] (OT)An OpAmp Question
Phil
- [JN] Re: Tubes for sale
Phil
- [JN] any DHT tube suitable for driver on 300B DRD amp?
Phil
- [JN] 220V 50 Hz vs 110V 60 Hz
Phil
- [JN] ISO: Power Iron
Douglas Piccard
- [JN] little variacs
Douglas Piccard
- [JN] FYI: FA & FS: Exemplary Compression Drivers
Henry Platt
- [JN] Re: Sound Digest, Vol 9, Issue 45
RUINTHERE at aol.com
- [JN] Amorphous chokes for sale
Christian Rintelen
- [JN] Re: Pioneer 656 mod
Christian Rintelen
- [JN] first come first serve -- free space at ETF.04
Christian Rintelen
- [JN] Swapmeet: XO-DAC + Speakers
Joe Roberts
- [JN] Rotary switches for stepped attenuator
S.C.Busbridge at bton.ac.uk
- [JN] Acoustic Dimension Stepped Attenuator
S.C.Busbridge at bton.ac.uk
- [JN] cold soldering iron?
SBench at aol.com
- [JN] Pioneer Hi-Bit
Bill Sadler
- [JN] Re: Re: Amorphous chokes
Ed Sawyer
- [JN] any DHT tube suitable for driver on 300B DRD amp?
Ed Sawyer
- [JN] Re: James tranny-equipped 300B stereo amp
Ed Sawyer
- [JN] James Transformers
Ed Sawyer
- [JN] Re: It it possible to use tube rectifation for low voltage? YES
Ed Sawyer
- [JN] Re:45s
Ed Sawyer
- [JN] TJ Mesh Plates or S shaped 45's?
Phil Sieg
- [JN] Wanted: suggestions on tuning frequency response
Dan Marshall Sr.
- [JN] Any opinions on James Transformers?
Dan Marshall Sr.
- [JN] Re: Pioneer 656 mod
Kurt Steffensen
- [JN] digital/software based analysers ?
Kurt Steffensen
- Sv: Sv: [JN] digital/software based analyzers ?
Kurt Steffensen
- Sv: Sv: Sv: Sv: [JN] digital/software based analyzers ?
Kurt Steffensen
- [JN] Kurt, constant directivity ribbon horn loaded tweeter
Kurt Steffensen
- [JN] Price for SpectraPRO ??
Kurt Steffensen
- [JN] Re: [JNLynx soundcards
Kurt Steffensen
- [JN] James OPT's
Mike Stehr
- [JN] Re: Hi
Steven
- [JN] Re:
Steven
- [JN] Re: Thanks :)
Steven
- [JN] Re:
Steven
- [JN] Re: Thanks :)
Steven
- [JN] Re:
Steven
- [JN] Re: Hi
Steven
- [JN] Re: Thanks :)
Steven
- [JN] Pioneer Hi-Bit
TL
- [JN] digital/software based analyzers ?
Tan Chok Shiong, Albert
- Sv: [JN] digital/software based analyzers ?
Tan Chok Shiong, Albert
- [JN] James tranny-equipped 300B stereo amp
Teslow, Philip
- [JN] James Transformers
Phil Townsend
- [JN] James trannies
Phil Townsend
- [JN] It it possible to use tube rectifation for low voltage?
Phil Townsend
- [JN] everybody got somethin' to hide ...
TubeGarden at aol.com
- [JN] Hong Kong Road Trip
TubeGarden at aol.com
- [JN] Attenuator
TubeGarden at aol.com
- [JN] freq resp
TubeGarden at aol.com
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
TubeGarden at aol.com
- [JN] Interesting article
TubeGarden at aol.com
- [JN] Interesting article
TubeGarden at aol.com
- [JN] any DHT tube suitable for driver on 300B DRD amp?
TubeGarden at aol.com
- [JN] Correction: William, not Dan Synder. New England Analog (Krell Designer?)
TubeGarden at aol.com
- [JN] M-Audio Delta 410
Rod Usher
- [JN] Hong Kong Road Trip
Owen Young
- [JN] Wanted: suggestions on tuning frequency response
fuigan ang
- [JN] Re: Pioneer 656 mod
fuigan ang
- [JN] 220V 50 Hz vs 110V 60 Hz
fuigan ang
- [JN] TJ 45 tubes
GLenz10183 at aol.com
- [JN] Re: Sound Digest, Vol 9, Issue 45
RUINTHERE at aol.com
- [JN] cold soldering iron?
SBench at aol.com
- [JN] everybody got somethin' to hide ...
TubeGarden at aol.com
- [JN] Hong Kong Road Trip
TubeGarden at aol.com
- [JN] Attenuator
TubeGarden at aol.com
- [JN] freq resp
TubeGarden at aol.com
- [JN] Damping the Dread Woofer-Honk [WAS freq resp]
TubeGarden at aol.com
- [JN] Interesting article
TubeGarden at aol.com
- [JN] Interesting article
TubeGarden at aol.com
- [JN] any DHT tube suitable for driver on 300B DRD amp?
TubeGarden at aol.com
- [JN] Correction: William, not Dan Synder. New England Analog (Krell Designer?)
TubeGarden at aol.com
- [JN] Re: Woofer boom problem
bear
- [JN] Teddy Bear Abuse!!
bear
- [JN] FYI: FA & FS: Exemplary Compression Drivers
bear
- [JN] Rotary switches for stepped attenuator
S.C.Busbridge at bton.ac.uk
- [JN] Acoustic Dimension Stepped Attenuator
S.C.Busbridge at bton.ac.uk
- [JN] TJ Mesh Plates or S shaped 45's?
tony daggs
- [JN] TJ Mesh Plates or S shaped 45's?
tony daggs
- [JN] Re: Re: corrected
dunker at invalid.ed.ntnu.no
- [JN] Re: Re: corrected
dunker at invalid.ed.ntnu.no
- [JN] Any opinions on James Transformers?
mgreene
- [JN] Any opinions on James Transformers?
mgreene
- [JN] cold soldering iron?
mgreene
- [JN] Replacement Head for EMT 980 CD Player
tcma at netvigator.com
- [JN] TJ Mesh Plates or S shaped 45's?
phclark
- [JN] unsubscribe
projas3
- Sv: Sv: Sv: Sv: [JN] digital/software based analyzers ?
john ridley
- Sv: Sv: Sv: [JN] digital/software based analyzers ?
john ridley
- [JN] digital/software based analyzers ?
john ridley
- [JN] Dan Synder. New England Analog (Krell Designer?)
john ridley
- Guido, Kurt [JN] digital/software based analyzers ?
john ridley
- Guido, Kurt [JN] digital/software based analyzers ?
john ridley
- [JN] Price for SpectraPRO ??
john ridley
- [JN] Re: [DIY] subjectivity
john ridley
- [JN] Re: [DIY] subjectivity
john ridley
- [JN] Re: [JNLynx soundcards
john ridley
- [JN] Price for SpectraPRO ?
john ridley
- [JN] Amorphous chokes for sale
dave slagle
- [JN] Rotary switches for stepped attenuator
dave slagle
- [JN] little variacs
dave slagle
- [JN] Replacement Head for EMT 980 CD Player
tcma at netvigator.com
Last message date:
Tue Nov 30 05:55:30 CST 2004
Archived on: Mon Jul 18 17:01:07 CDT 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).